Raspberry Pi 的山寨升级版 CubieBoard

BSD当然要运行在RISC平台上,主要讨论但不限于 ARM,MIPS,PowerPC,SPARC
头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

Raspberry Pi 的山寨升级版 CubieBoard

帖子 unreal » 2013-01-28 14:40

官方网站:http://cubieboard.org/
中文论坛:http://cn.cubieboard.org/forum.php
英文资料:http://linux-sunxi.org/Cubieboard
资料下载:http://cubieboard.org/download/

技术参数:
● 1G ARM cortex-A8,NEON,VFPv3,256K二级缓存(国产全志A10噢~)
● Mali400, OpenGL ES GPU
● 1GB DDR3 @480MHz
● HDMI 1080p高清输出
● 100M网卡
● 4GB Nand Flash
● 2 USB Host, 1 MMC slot, 1 SATA, 1 ir
● 96pin扩展,支持 i2c, spi, lcd和各种传感器
● 运行Android, Ubuntu或其他Linux版本

套件含:一块cubieboard、一条电源连接线(5V/2A)、一条SATA线、一条串口线、一个亚克力外壳。国外售价 $49.00,淘宝价¥380.

如果能移植OB,那就是很好玩的一台RISC计算机~可惜龙芯不出这样的板子:(
图片
图片
图片
勤能補拙 Just do it now!

hyaska
铜 Cu
帖子: 311
注册时间: 2010-12-10 16:11

回复: Raspberry Pi 的山寨升级版 CubieBoard

帖子 hyaska » 2013-01-29 15:27

这个是A10,LINUX已经很成熟了,要运行OB差远了,OB人手不够啊。
玩OB要入BeagleBoard或PandaBoard,用的是TI的芯片。

另外A13也出来了

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

回复: Raspberry Pi 的山寨升级版 CubieBoard

帖子 unreal » 2013-01-30 15:50

hyaska 写了: 玩OB要入BeagleBoard或PandaBoard,用的是TI的芯片。
OpenBSD/beagle FTP上木有现成的,难道要自己从CVS下载代码构建?这个俺不会啊…
另外这些板子的价格是CubieBoard 的5倍以上~今天又碰到一件巨亏的事情:(年关难过了。300块的板子也只能先存个念想'_'
勤能補拙 Just do it now!

hyaska
铜 Cu
帖子: 311
注册时间: 2010-12-10 16:11

回复: Raspberry Pi 的山寨升级版 CubieBoard

帖子 hyaska » 2013-01-31 15:39

呵呵,玩A10,果断LINUX啊,买个160~170的小棒棒就行了,不用这么贵的。看视频安个XBMC就可以了,要不是换案桌的系统。这种东西就是看视频听音乐用了,偶尔跑个小服务还行,就是个玩具。

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

回复: Raspberry Pi 的山寨升级版 CubieBoard

帖子 unreal » 2013-01-31 18:32

安卓棒体积又过小了,扩展性差;安卓确实只是玩具。我是想弄个低功耗的小机器跑文件服务和NIS服务。
勤能補拙 Just do it now!

hdragon627
铬 Cr
帖子: 44
注册时间: 2011-05-04 11:00

回复: Raspberry Pi 的山寨升级版 CubieBoard

帖子 hdragon627 » 2013-02-08 16:38

好像nb 和fb 都有pi的版本了,ob什么时候出啊!

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

回复: Raspberry Pi 的山寨升级版 CubieBoard

帖子 unreal » 2013-02-10 23:54

据微博网友说FB current 10 也支持 cubieboard 了,NB也支持的话就可考虑买块来玩了。
勤能補拙 Just do it now!

hyaska
铜 Cu
帖子: 311
注册时间: 2010-12-10 16:11

回复: Raspberry Pi 的山寨升级版 CubieBoard

帖子 hyaska » 2013-03-04 20:34

入手这个不值得,还是Freescale i.MX6通用性好

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

跑FreeBSD的RaspberryPi dmesg

帖子 unreal » 2013-03-10 14:37

摘自 freebsdchina.org中文论坛

代码: 全选

Copyright (c) 1992-2013 The FreeBSD Project. 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 
The Regents of the University of California. All rights reserved. 
FreeBSD is a registered trademark of The FreeBSD Foundation. 
FreeBSD 10.0-CURRENT #0 r245446M: Tue Jan 15 12:53:26 SGT 2013 
root@fbsd10:/usr/obj/arm.armv6/usr/src/sys/BSD-PI arm 
CPU: ARM1176JZ-S rev 7 (ARM11J core) 
Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext 
WB enabled LABT branch prediction enabled 
16KB/32B 4-way instruction cache 
16KB/32B 4-way write-back-locking-C data cache 
real memory = 536870912 (512 MB) 
avail memory = 451592192 (430 MB) 
kbd0 at kbdmux0 
simplebus0: <Flattened device tree simple bus> mem 0xf2000000-0xf2ffffff on fdtbus0 
intc0: <BCM2835 Interrupt Controller> mem 0xf200b200-0xf200b3ff on simplebus0 
systimer0: <BCM2835 System Timer> mem 0xf2003000-0xf2003fff irq 8,9,10,11 on simplebus0 
Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000 
Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000 
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0xf2300000-0xf23000ff irq 70 on simplebus0 
bcm_sdhci_attach(): SDHCI frequency: 100MHz 
mmc0: <MMC/SD bus> on sdhci_bcm0 
mbox0: <BCM2835 VideoCore Mailbox> mem 0xf200b880-0xf200b8bf irq 1 on simplebus0 
mbox0: [GIANT-LOCKED] 
bcmwd0: <BCM2708/2835 Watchdog> mem 0xf210001c-0xf2100027 on simplebus0 
gpio0: <BCM2708/2835 GPIO controller> mem 0xf2200000-0xf22000af irq 57,59,58,60 on simplebus0 
gpio0: read-only pins: 46,47,48,49,50,51,52,53. 
gpio0: reserved pins: 48,49,50,51,52,53. 
gpioc0: <GPIO controller> on gpio0 
gpiobus0: <GPIO bus> on gpio0 
uart0: <PrimeCell UART (PL011)> mem 0xf2201000-0xf2201fff irq 65 on simplebus0 
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0xf2980000-0xf299ffff irq 17 on simplebus0 
usbus0 on dwcotg0 
fb0: <BCM2835 framebuffer device> on fdtbus0 
sc0: Unknown <16 virtual consoles, flags=0x300> 
Timecounters tick every 10.000 msec 
usbus0: 480Mbps High Speed USB v2.0 
ugen0.1: <DWCOTG> at usbus0 
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 
mmcsd0: 3776MB <SDHC SA04G 0.4 SN XXXXXXXXXX MFG 06/2010 by 2 TM> at mmc0 25.0MHz/4bit/65535-block 
fb0: 1680x1050(0x0@0,0) 16bpp 
fb0: pitch 3360, base 0x5d385000, screen_size 3548160 
Root mount waiting for: usbus0 
uhub0: 1 port with 1 removable, self powered 
Root mount waiting for: usbus0 
ugen0.2: <vendor 0x0424> at usbus0 
uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on usbus0 
uhub1: MTT enabled 
uhub1: 3 ports with 2 removable, self powered 
Root mount waiting for: usbus0 
ugen0.3: <vendor 0x0424> at usbus0 
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0 
smsc0: chip 0xec00, rev. 0002 
miibus0: <MII bus> on smsc0 
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 
ue0: <USB Ethernet> on smsc0 
ue0: Ethernet address: XX:XX:XX:XX:XX:XX 
Root mount waiting for: usbus0 
ugen0.4: <MLK> at usbus0 
ukbd0: <EP1 Interrupt> on usbus0 
kbd1 at ukbd0 
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]... 
warning: no time-of-day clock registered, system time will not be set accurately 
smsc0: chip 0xec00, rev. 0002

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

跑Freebsd的CubieBoard CPU信息

帖子 unreal » 2013-03-10 14:53

摘自 freebsdchina.org中文论坛

代码: 全选

Copyright (c) 1992-2013 The FreeBSD Project. 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 
   The Regents of the University of California. All rights reserved. 
FreeBSD is a registered trademark of The FreeBSD Foundation. 
FreeBSD 10.0-CURRENT #27 r245250:245455M: Wed Jan 16 09:42:54 ULAT 2013 
    tsgan@bsd.mobicom.mn:/usr/obj/arm.armv6/usr/src/sys/CUBIEBOARD arm 
WARNING: WITNESS option enabled, expect reduced performance. 
CPU: Cortex A8-r3 rev 2 (Cortex-A core) 
 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext 
 WB disabled EABT branch prediction enabled 
LoUU:2 LoC:2 LoUIS:1 
Cache level 1: 
 32KB/64B 4-way data cache WT WB Read-Alloc 
 32KB/64B 4-way instruction cache Read-Alloc 
Cache level 2: 
 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc 
real memory  = 1073741824 (1024 MB) 
avail memory = 1042694144 (994 MB) 
可见 ARM v7 的Cortex-A8 还是在跑 ARMv6 指令集,不支持浮点协处理器。

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

Re: 跑Freebsd的CubieBoard CPU信息

帖子 unreal » 2013-03-13 0:44

unreal 写了: 可见 ARM v7 的Cortex-A8 还是在跑 ARMv6 指令集,不支持浮点协处理器。
我在freebsd官方论坛也这么回了一个帖子,有关开发者回复说:

代码: 全选

CPU: Cortex A8-r3 rev 2 (Cortex-A core)
This line tells you it is an ARMv7.

The arm.armv6 in the kernel directory is because the ARMv6 and ARMv7 cores are close enough that they share a large amount of code and are considered the same architecture from FreeBSD's point of view. Floating point support is being worked on but a few toolchain issues need to be fixed first.

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

CubieBoard 已经 2 啦~

帖子 unreal » 2013-08-29 20:44

http://cubieboard.org/2013/06/19/cubieboard2-is-here/
Below is the full specification of cubieboard2:
● CPU ARM® Cortex™-A7 Dual-Core
● GPU ARM® Mali400MP2, Complies with OpenGL ES 2.0/1.1
● Memory 1GB DDR3 @960M
● Storage 4GB internal NAND flash, up to 64GB on uSD slot, up to 2T on 2.5 SATA disk
● Power 5VDC input 2A or USB otg input
● Networking 10/100 ethernet, optional wifi
● USB Two USB 2.0 HOST, one USB 2.0 OTG
● Other One IR
● Extended Interfaces 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more

图片
目前taobao最低¥365。同时1代普遍降至¥299。

f5b
锆 Zr
帖子: 642
注册时间: 2011-10-22 20:43

Re: CubieBoard 已经 2 啦~

帖子 f5b » 2013-08-30 16:11

unreal 写了:http://cubieboard.org/2013/06/19/cubieboard2-is-here/
Below is the full specification of cubieboard2:
● CPU ARM® Cortex™-A7 Dual-Core
● GPU ARM® Mali400MP2, Complies with OpenGL ES 2.0/1.1
● Memory 1GB DDR3 @960M
● Storage 4GB internal NAND flash, up to 64GB on uSD slot, up to 2T on 2.5 SATA disk
● Power 5VDC input 2A or USB otg input
● Networking 10/100 ethernet, optional wifi
● USB Two USB 2.0 HOST, one USB 2.0 OTG
● Other One IR
● Extended Interfaces 96 extend pin interface, including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more

目前taobao最低¥365。同时1代普遍降至¥299。
看起来确实好便宜啊,可惜OpenBSD不支持
还有这么丰富的接口,比较起来beaglebone black 好贵啊

不过话说回来,丰富接口功能多,如果做桌面系统,性能可能也跟不上。还不如买个x86的二手瘦客户机。

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

Re: CubieBoard 已经 2 啦~

帖子 unreal » 2013-08-30 21:24

f5b 写了: 看起来确实好便宜啊,可惜OpenBSD不支持
还有这么丰富的接口,比较起来beaglebone black 好贵啊

不过话说回来,丰富接口功能多,如果做桌面系统,性能可能也跟不上。还不如买个x86的二手瘦客户机。
FreeBSD支持阿,OB的话,可以在ARM的邮件列表里面问问,俺E文盲 没敢问……

此类ARM小板子我的想法是做家用文件服务器(时髦说法是 私有云服务),其低功耗能符合长期开机了,毕竟电费不便宜,尤其经历了今年的炎焱燚夏天,电费已到第三阶 +_+

f5b
锆 Zr
帖子: 642
注册时间: 2011-10-22 20:43

Re: Raspberry Pi 的山寨升级版 CubieBoard

帖子 f5b » 2013-10-23 9:50

OpenBSD current 已经支持啦

http://marc.info/?l=openbsd-cvs&m=138244818822817&w=2

CVSROOT: /cvs
Module name: src
Changes by: jasper@cvs.openbsd.org 2013/10/22 07:22:20

Modified files:
sys/arch/armv7/conf: files.armv7
Added files:
sys/arch/armv7/allwinner: a1xintc.c a1xintc.h allwinner.c
allwinner_machdep.c allwinnerreg.h
allwinnervar.h awa1x.c awa20.c
awahci.c awccmu.c awccmuvar.h awdog.c
awe.c awehci.c awpio.c awpiovar.h
awrtc.c awtimer.c awuart.c awuartreg.h
files.allwinner
sys/arch/armv7/conf: GENERIC-ALLWINNER RAMDISK-ALLWINNER

Log message:
add support for allwinner-based devices (A1x/A20), such as the cubieboard;
any rough edges will be polished intree.

hard work done by Artturi Alm w/ feedback/input from Markus Hennecke,
patrick@ and various others.

头像
unreal
银 Ag
帖子: 1072
注册时间: 2010-06-07 18:52

帖子 unreal » 2013-10-23 19:57

wakaka!! 家用低功耗静音服务器即将成为现实!俺以后主要玩ARM了~~

----------------------^^-----------------------**-------------------------
刚刚看了ftp,已经有 armv7 目录,看起来要整合 beagle 平台,arm成为大平台的节奏阿~~与以前的硬件平台细分完全不同的赶脚~

f5b
锆 Zr
帖子: 642
注册时间: 2011-10-22 20:43

Re: Raspberry Pi 的山寨升级版 CubieBoard

帖子 f5b » 2013-10-27 12:11

http://www.openbsd.org/armv7.html

A1x/A20

Cubieboard and Cubieboard 2
pcDuino

还支持 pcDuino
墙内开花墙外香的设备 http://www.pcduino.com

livemoon
铁 Fe
帖子: 61
注册时间: 2013-04-06 16:24

Re: Raspberry Pi 的山寨升级版 CubieBoard

帖子 livemoon » 2013-10-30 15:57

CubieBoard2和pcDuino哪个跑OB好呢

f5b
锆 Zr
帖子: 642
注册时间: 2011-10-22 20:43

Re: Raspberry Pi 的山寨升级版 CubieBoard

帖子 f5b » 2013-10-30 20:54

livemoon 写了:CubieBoard2和pcDuino哪个跑OB好呢
看配置CubieBoard 跑OB好些,接口丰富,有sata

livemoon
铁 Fe
帖子: 61
注册时间: 2013-04-06 16:24

Re: Raspberry Pi 的山寨升级版 CubieBoard

帖子 livemoon » 2013-10-30 23:18

f5b 写了:
livemoon 写了:CubieBoard2和pcDuino哪个跑OB好呢
看配置CubieBoard 跑OB好些,接口丰富,有sata
想买个试试看,想用ob跑pf代替路由器防火墙和web,不知道各位有什么推荐的板子吗

回复

在线用户

正浏览此版面之用户: Semrush [Bot] 和 9 访客